Download DFU Flash Tool Latest Version [All Free]

DFU Flash Tool is a small Windows program that helps to flash or install stock firmware on any Broadcom Smartphone and tablet. Additionally, It also helps to remove screen locks, repair stuck at device logo, upgrade or downgrade OS, and Frp bypass in just one click.

If you want a hassle-free solution to restore a hard or soft-bricked, stuck at boot logo (Doesn’t boot up), flash, unlock, repair, or upgrade & downgrade the OS of your Broadcom phone then the DFU Flash program can be helpful for you.

More: Download Xiaomi Mi Flash Tool Latest Official All Version Setup Free

Why DFU Tool is useful?

The DFU Flash Tool is an after-sales stock firmware flash program for Broadcom devices that supports to flash stock firmware to fix the phone within a few minutes easily.

Nowadays, Smartphones become a part of our daily lives. So, it is quite usual to face problems such as Stuck at bootlogo, DRL errors, Slowness, forgotten Pattern Password, and FRP lock with Android smartphones. Sometimes, Factory Reset can fix some problems but that isn’t a permanent solution. So, the flashing is the only solution.

The procedure of using the tool with the flash file is pretty simple, just run the tool to your PC, then select the stock firmware, & Click on the Start button, Now Power Off your phone and Put it into the download mode then connect to the computer, that’s it.

Check: QFlash Tool V9.1.7 Download Latest Version All Setup Free

How to Use DFU Tool

The following step-by-step process let you easily install the Flash Tool on your Windows computer and also helps you to flash Broadcom firmware on your Broadcom-based phones. So, follow below process completely.

Extract & Run the tool

• Download & extract DFU Flash Tool to your PC

• Open the Flash tool folder and run Dfu_tool.exe.
• The Flash tool will opened

Configure DFU Flash Tool

• Click on Browse

• Then select the DFU compatible firmware folder
• The Firmware will be automatically reflected on the Flash tool.

• Next, Go to Download menu

Connect the Phone

• Power Off your Broadcom phone & put it into the Download Mode
• Then connect the phone to the Computer
• Go back to the Flash tool
• Now you are able to see Broadcom COMPort which means the device is successfully connected.

Start Flashing

• Then Click on Start
• The Flashing process will start

• Wait for the finish.

• Once finished, you will get the Passed message on the tool
• Then disconnect and power on your Qualcomm phone.
• That’s it.

More: Tecno Flash Tool Download Latest Setup Free