Walton Nexg N9 Unlock FRP Google File Download

If your Walton Nexg N9 is stuck at Google “Verify your account” screen after a factory reset and you have forgotten the previously synced Google credentials, Then, you can use the Walton Nexg N9 FRP bypass file to unlock the Google lock and regain access to the device without the old account easily.

What is Factory Reset Protection?

The FRP Factory Reset Protection is a security feature that turned on automatically after adding a Google account and protects the Android phone after a factory reset.

If someone performs resetting the phone without the owner’s authorization, the FRP prevents the access and asks to verify the last owners credentials to keep personal data safe and makes the phone useless.

Do read: Walton Primo GH9 FRP Google Bypass File

Do read: Walton Orbit Y70C FRP Google Reset File

How to Walton Nexg N9 Bypass FRP Lock

• Download Walton Nexg N9 MTK FRP File with SP Flash tool to your PC.
• Extract the file on your PC.
• Make Sure, Install MTK USB Driver, (Skip this if you are already have done).
• Open the Flash tool folder & Run SP Flash tool.exe.

• Click on Choose from Scatter-Loading File Tab and select the MTK_Android_scatter.txt file.
  • Tap Open.
• Now Untick the Preloader Partition.

Do read: Remove FRP Google Lock on Walton Orbit Y21

Configure the Flash tool

• Goto Format menu > Select Manual Format Flash.

• Copy and Paste the below FRP Address into the SP flash tool

• Click START.

Also read: Walton Nexg N6 FRP Google Unlock File

Connect Walton Nexg N9 Phone to Windows

• Power Off your Walton Nexg N9 phone.
• Connect your device to computer via USB cable.
• Run Auth tool & Click Disable Auth
• This will disable auth proctection.

• Open Device Manager > Check the COMPORT Number.
• Select the COMPORT number (In my case I have COM9).

Do read: Unlock FRP Google Lock on Walton Nexg N10 Ultra

Start unlocking

• The unlocking process will begin.
• It will take some time to finish.

• Once finished, disconnect and Power On your Walton Nexg N10.
• Setup all initial steps.
• That’s it.

Method 2: Reset with FRP Tool

• Go to, MediaTek tab.
• Select the DA & Preloader file from FRP File.
• Then, navigate to Service tab & Click Reset FRP.
• Now, power off your Walton Nexg N9 & connect to Windows.
• The phone will be detected & bypass the FRP lock.
• That’s it.

More Walton FRP Guide:

1. Walton Primo N5 Remove Google FRP File
2. Walton Primo N5 Remove Google FRP File
3. Android Utility Tool
4. Walton Nexg N10 FRP Google Remove File