Walton Nexg N10 FRP Google Remove File Download

If your Walton Nexg N10 is stuck at Google “Verify your account” screen after a factory reset and you have forgotten the previously synced Google credentials, Then, you can use the Walton Nexg N10 FRP bypass file to remove the Google lock and regain access to the device without the old account easily.

What is FRP lock?

The FRP Factory Reset Protection is a security feature that turned on automatically after adding a Google account and protects the Android phone after a factory reset.

If someone performs resetting the phone without the owner’s authorization, the FRP prevents the access and asks to verify the last owners credentials to keep personal data safe and makes the phone useless.

Do read: Walton Orbit Y12 FRP Google Remove File

Do read: Walton Nexg N6 Lite Unlock Google FRP File

How to Walton Nexg N10 Bypass FRP Lock

• Download Walton Nexg N10 MTK FRP File with SP Flash tool to your PC.
• Extract the file on your PC.
• Make Sure, Install MTK USB Driver, (Skip this if you are already have done).
• Open the Flash tool folder & Run SP Flash tool.exe.

• Click on Choose from Scatter-Loading File Tab and select the MTK_Android_scatter.txt file.
  • Tap Open.
• Now Untick the Preloader Partition.

Do read: Walton Primo HM7 FRP File

Configure the Flash tool

• Goto Format menu > Select Manual Format Flash.

• Copy and Paste the below FRP Address into the SP flash tool

• Click START.

Also read: Walton Nexg N74 FRP File

Connect Walton Nexg N10 Phone to Windows

• Power Off your Walton Nexg N10 phone.
• Connect your device to computer via USB cable.
• Run Auth tool & Click Disable Auth
• This will disable auth proctection.

• Open Device Manager > Check the COMPORT Number.
• Select the COMPORT number (In my case I have COM9).

Do read: Unlock FRP Google Lock on Walton Nexg N10 Ultra

Start unlocking

• The unlocking process will begin.
• It will take some time to finish.

• Once finished, disconnect and Power On your Walton Nexg N10.
• Setup all initial steps.
• That’s it.

Method 2: Walton Nexg N10 Reset with FRP Tool

• Go to, MediaTek tab.
• Select the DA & Preloader file from FRP File.
• Then, navigate to Service tab & Click Reset FRP.
• Now, power off your Walton Nexg N10 & connect to Windows.
• The phone will be detected & bypass the FRP lock.
• That’s it.

More Walton FRP Guide:

1. Remove FRP Google Lock on Walton Nexg N70
2. Walton Primo N5 Remove Google FRP File
3. Android Utility Tool
4. Remove FRP Google Lock on Walton Nexg N70