AGM G2 (Guardian) Qualcomm Firehose No auth Loader file is a modified Qualcomm EDL firehose loader that helps to bypass Secure Boot Auth permission to Erase FRP, Factory Reset, Unlock Pattern, Remove User lock, Flash Firmware, Fix hang-on logo, etc through EDL mode.
FireHose File is a Qualcomm programmer file (.mbn, .elf) comes with Qualcomm stock firmware that uses Sahara protocal to verify partition data of phone and firmware & enables access to NAND storage (eMMC/UFS) for flashing firmware, reset userdata, repairing or unlocking the phone through EDL 9008 mode.
Download AGM G2 Guardian No Auth Firehose Loader File
However, the latest Qualcomm powered smartphones need valid authorizations to communicate with the Nand memory. The customized No Auth Firehose file comes with bypassed authenication, so, the autorization will not be required to flash or unlock the phone.
Do check: Phoenix Service Tool
| Name: | AGM_G2_(Guardian)_Firehose.zip |
| Size: | 1MB |
| Credit: | BYPASSFRPFILES.COM |
| Password: | bypassfrpfiles.com |
| USB Driver: | Qualcomm USB Driver |
| Tool 1: | QPST Tool, QFil Tool |
| Tool 2: | UnlockTool (Any tool that supports custom loaders) |
| Join Telegram: | t.me/droidsolution |
How to Use
- Download & extract the AGM G2 Guardian Firehose Without Auth Loader file
- Now you have to use UnlockTool, BFT Tool or any other Qcom loader supported tool.
- Open the tool folder and Run UnlockTool.exe.
- Go to Qualcomm
- Select the AGM_G2_(Guardian)_Firehose.elf
- If it doesn’t not works, then download the stock rom of your phone & use No auth with Rom
- Open Device Manager on your PC.
- Now Power Off your AGM G2 Guardian.
- Put your device in EDL Mode.
- Press & Hold VOL – & Power Key together, & connect USB.
- Open Device manager you’ll see the Qualcomm QDLOADER 9008 Port .
- Go back to the Unlocktool.
- Now click Reset FRP/Factory Reset.
- It will take some time to unlock your phone.
- Once you get the success message.
- Disconnect & Power On your AGM G2 Guardian phone.
- That’s it.
More Loader Files
