In this article, we’ll show you Realme C55 RMX3710 MTK Test Point that helps you to Reboot to MediaTek BROM Flash mode and allows you to repair the Bricked, Unlock pattern lock, FRP lock and other OS related issues easily.
What is Test Point?
A Test point is a copper points on a PCB that allows you to boot the phone into the MediaTek Flash mode to perform reprogramming, flashing, unlocking or repairing the phone.
The Realme C55 RMX3710 powered-by MediaTek SOC’s & comes with locked USB & bootloader. So, it is impossible to boot the device into the brom mode without authorization.
The Test point enables the phone boot into the MTK Brom mode for flash stock ROM, bypass FRP lock, or reset userdata, etc using any tool.
Read more: Realme Narzo 60x RMX3782 UFS ISP PinOUT | Test Point
Realme C55 RMX3710 MTK Test Point Image:
Here we provide Test Point Methods to carefully boot your device into Flash Mode. So, follow the below methods to successfully Reboot your Realme C55 to brom flash mode.
More: QPST Tool – Qualcomm QPST Flash Tool Download Latest All Version
Tip: You can use a microscope or a 10x magnifier to identify the points correctly.
Required Tools for EDL Mode Method
Make sure you have fulfilled the following requirements:
- A tool that supports EDL mode works.
- A tweezers
- Microscope or magnifier
Read more: Tecno Preloader File
How to Boot into Brom Mode
- Open the back panel of the Realme C55.
- Disassemble the phone.
- Locate the EDL point area on the PCB.
- Now you need a Copper Wire or Tweezer to short that pinout
- Once you’re done, connect your smartphone to the PC using a USB cable
- Realme C55 RMX3710 Test point to Hard Reset, FRP Bypass or Flash firmware.
Do read: Honor X6c NIC-LX1 EMMC ISP PinOUT
- Now, use any unlock or flashing tool for MediaTek to fix your phone.
- In the tool, click scan COMPort
- Select the MediaTek BROM Flash Port.
- Bypass FRP: Navigate to the tool functions: Click – Reset FRP
- Fix Dead Boot: Select the firmware & click flash.
- That’s it.
