On this page, we’ll show you Tecno Spark 8C KG5J MTK Test Point that helps you to Reboot to MediaTek BROM Flash mode and allows you to repair the Bricked, Unlock pattern lock, FRP lock and other OS related issues easily.
What is Test Point?
A Test point is a copper points on a PCB that allows you to boot the phone into the MediaTek Flash mode to perform reprogramming, flashing, unlocking or repairing the phone.
The Tecno Spark 8C Test point enables the phone boot into the MTK Brom mode for flash stock ROM, bypass FRP lock, or reset userdata, etc using any tool.
Read more: Tecno Spark 8C KG5K FRP File Download
The Tecno Spark 8C powered-by MediaTek SOC’s & comes with locked USB & bootloader. So, it is impossible to boot the device into the brom mode without authorization.
Read more: Delete FRP Tecno Spark 8C Fix Mic Icon Not Working Without PC Free
Tecno Spark 8C KG5J MTK Test Point Image:
Here we provide Test Point Methods to carefully boot your device into Flash Mode. So, follow the below methods to successfully Reboot your Tecno Spark 8C to brom flash mode.
More: QPST Tool – Qualcomm QPST Flash Tool Download Latest All Version
Tip: You can use a microscope or a 10x magnifier to identify the points correctly.
Required Tools for EDL Mode Method
Make sure you have fulfilled the following requirements:
- A tool that supports EDL mode works.
- A tweezers
- Microscope or magnifier
Read more: Tecno Preloader File
How to Boot into Brom Mode
- Open the back panel of the Tecno Spark 8C
- Disassemble the phone.
- Locate the EDL point area on the PCB.
- Now you need a Copper Wire or Tweezer to short that pinout
- Once you’re done, connect your smartphone to the PC using a USB cable
- Tecno Spark 8C KG5J Test point to Hard Reset, FRP Bypass or Flash firmware.
Do read: Bypass Google Verification on Tecno Spark 10 Pro
- Now, use any unlock or flashing tool for Qualcomm to fix your phone.
- In the tool, click scan COMPort
- Select the MediaTek BROM Flash Port.
- Bypass FRP: Navigate to the tool functions: Click – Reset FRP
- Fix Dead Boot: Select the firmware & click flash.
- That’s it.
Also: Delete FRP Tecno Spark 8
