In this article, we will guide you though the step-by-step simple process of repairing dead boot, stuck on logo, Null IMEI on Tecno Spark 10C (KI5K) using the Dead boot Repair File and SPD Flash Tool.
Therefore, if your Tecno Spark 10C is stuck at Tecno boot logo, or IMEI Null, Dead boot, dead after flashing then you can use the following file & guide to fix the issues easily.
Read more: Tecno Spark 10C KI5M FRP File (SPD PAC)
Download Tecno Spark 10C K15k Fix File
The Tecno Spark 10C SPD PAC Dead Boot Repair File enables you to fix stuck at boot logo, boot repair, dead boot repair, Imei Null Fix using SPD Flash tool easily. The procedure will requires Windows computer & the following files.
File Name: Tecno_K15k_FRP_File.zip
Size: 4GB
Type: Free
Join us on Telegram: t.me/droidsolution
Password: Bypassfrpfiles.com
USB Driver: MTK USB Driver
Flash Tool: SP Flash Tool
Also read: Tecno Spark 10C Remove Google Verification FRP (Without PC)
How to Fix Dead Boot on Tecno Spark 10C
Disclaimer: Bypassfrpfiles.com is not responsible for any damage to your device that may occur during or after following this procedure. Please proceed with caution.
Extract Files & Tool
- Download Tecno Spark 10C K15k Fix File
- Next, Download SPD Upgrade Tool.
- Extract the file on your PC
- Now power off your phone.
Run the Flash Tool
- Open the FRP tool folder and run SPD_Upgrade_tool.exe.
- Click Gear icon and give the file path of the extracted FRP file folder.
- Make Sure, Install SPD USB driver, (Skip this if you are already have done).
Connect your Tecno Spark 10C to Windows Computer
- Click Start to begin the flashing or repairing process.
- Press and hold Volume down and connect your Tecno Spark 10C to the computer.
- Wait for the finish.
- Once finish, disconnect and power on your Tecno Spark 10C.
- That’s it.
Read More: Bypass Google Verification FRP on Tecno Camon 20 Pro
Read More tutorials:
- Bypass Google Verification FRP on Tecno Camon 20 Pro
- Tecno Spark Go 2024 BG6M Latest FRP File
- Tecno Camon 30S Pro Bypass FRP Google Lock
Note:
Beginner: If you are a beginner or new to flashing and not confident enough for the process, then we strongly recommend you to visit nearest service center or seek a professional technician to avoid potential risks.
Bootup Process: After flashing the phone, it will take 5-10 minutes to boot up completely. Keep patients waiting for the phone to completely boot up.
USB Driver: If you’re facing error while connecting the Tecno phone to Windows, then download & install the SPD USB Driver on your Windows.
Compatibility: Only use the file on Tecno Spark 10C K15k model. Don’t try this to any other Tecno models.
