Xiaomi Redmi K90 No Auth Loader Download Free

Xiaomi Redmi K90 No auth Loader helps to bypass Secure Boot Auth permission for Erase FRP, Factory Reset, Unlock Pattern, Remove User lock, Flash Firmware, Fix hang-on logo, etc through EDL mode.

Download Xiaomi Redmi K90 No Auth Loader

FireHose File is a component of Qualcomm stock firmware that verifies the partition over phone and firmware & asks users for an Authentication ID to flash or unlock the phone. But, the customized No Auth Firehose file comes with bypassed auth, so, Authentication will not be required to flash or unlock the phone.

Do check: Phoenix Service Tool

Name:	Redmi_K90_No_Auth.zip
Size:	1MB
Credit:	BYPASSFRPFILES.COM
USB Driver:	Qualcomm USB Driver
Tool 1:	QPST Tool, QFil Tool
Tool 2:	UnlockTool (Any tool that supports custom loaders)
Join Telegram:	t.me/droidsolution

How to Use

• Download & extract the Xiaomi Redmi K90 No Auth Loader file to your computer.
• Then Download & extract the Qfil tool.

• Open the tool folder and Run Qfil.exe.

• Tick on Flat build.

• Click on BROWSE from the Select Programmer path tab.

• Choose the Redmi_K90_No_Auth.melf

• Then click on Load XML.

• Select RawProgram0.xml & Patch0.xml file.

• Open Device Manager on your PC.
• Now Power Off your Xiaomi Redmi K90.
• Put your device in EDL Mode.
• Press & Hold VOL – & Power Key together, until you see the Qualcomm QDLOADER 9008 Port on your phone.
• Go back to the Qfil tool.

• Select the Comport by clicking on the Select Port tab.

• Now click on Tools tab.
• Then Select Partition Manager > OK.

• It will take some time to read your device Partition table.
• Once done, you will get the Partition details of your phone.

• Go down and select USERDATA partition.
• Right click on USERDATA Partition & Select Manage Partition Data.

• Click on Erase > Yes.
• It will erase the Userdata partiton of your phone.
• Once you get the success message.
• Disconnect & Power On your Xiaomi Redmi K90 phone.
• That’s it.

More: Poco M2 Pro No Auth Loader