If your Redmi K60 is stuck at boot logo, Reset FRP, Screen lock or repair OS using any EDL Mode. This guide, we will covered Xiaomi Redmi K60 EDL Test Point to Reboot to EDL 9008 Mode & quickly fix the issue and repair the phone easily.
Read more: Realme 10 Pro Plus RMX3686 Test Point
What is EDL Point?
A EDL point is a copper points on a PCB that allows you to boot the phone into the MediaTek Flash mode to perform reprogramming, flashing, unlocking or repairing the phone.
Read more: Realme C75 RMX3941 Test Point
The Redmi K60 EDL point enables the phone boot into the Qualcomm mode for flash stock ROM, bypass FRP lock, or reset userdata, etc using any tool.
Read more: Oppo A5 Pro 5G UFS ISP Pinout
The Redmi K60 powered-by Qualcomm SOC’s & comes with locked USB & bootloader. So, it is impossible to boot the device into the brom mode without authorization.
Read more: Vivo Y29S PD2443F ISP Pinout
Xiaomi Redmi K60 Test Point Image:
Here we provide Test Point Methods to carefully boot your device into Flash Mode. So, follow the below methods to successfully Reboot your Redmi K60 to EDL flash mode.
Also read: Oppo A53 CPH2127 EDL Test Point
More: QPST Tool – Qualcomm QPST Flash Tool Download Latest All Version
Tip: You can use a microscope or a 10x magnifier to identify the points correctly.
Do read: Vivo Y29S PD2443F ISP Pinout
Required Tools for EDL Mode Method
Make sure you have fulfilled the following requirements:
- A tool that supports BROM mode works.
- A tweezers
- Microscope or magnifier
Read more: Redmi 13 5G UFS ISP PinOUT
How to Boot into EDL Mode
- Open the back panel of the Redmi K60
- Disassemble the phone.
- Locate the EDL point area on the PCB.
- Now you need a Copper Wire or Tweezer to short that pinout
- Once you’re done, connect your smartphone to the PC using a USB cable
- Xiaomi Redmi K60 EDL Test point to Hard Reset, FRP Bypass or Flash firmware.
Do read: Realme C71 RMX5303 SPD Test Point
- Now, use any unlock or flashing tool for Qualcomm to fix your phone.
- In the tool, click scan COMPort
- Select the MediaTek BROM Flash Port.
- Bypass FRP: Navigate to the tool functions: Click – Reset FRP
- Fix Dead Boot: Select the firmware & click flash.
- That’s it.
