This guide, we’ll show you Realme 10 Pro Plus RMX3686 Test Point that helps you to Reboot to MediaTek BROM Flash mode and allows you to repair the Bricked, Unlock pattern lock, FRP lock and other OS related issues easily.
Read more: Realme C75 RMX3941 Test Point
What is Test Point?
A EDL point is a copper points on a PCB that allows you to boot the phone into the MediaTek Flash mode to perform reprogramming, flashing, unlocking or repairing the phone.
Read more: Redmi 13 5G UFS ISP PinOUT
The Realme 10 Pro Plus Test point enables the phone boot into the MTK Brom mode for flash stock ROM, bypass FRP lock, or reset userdata, etc using any tool.
Read more: Oppo A5 Pro 5G UFS ISP Pinout
The Poco Pad powered-by MediaTek SOC’s & comes with locked USB & bootloader. So, it is impossible to boot the device into the brom mode without authorization.
Read more: Vivo Y29S PD2443F ISP Pinout
Realme 10 Pro Plus RMX3686 Test Point Image:
Here we provide Test Point Methods to carefully boot your device into Flash Mode. So, follow the below methods to successfully Reboot your Realme 10 Pro Plus to brom flash mode.
Also read: Oppo A53 CPH2127 EDL Test Point
More: QPST Tool – Qualcomm QPST Flash Tool Download Latest All Version
Tip: You can use a microscope or a 10x magnifier to identify the points correctly.
Do read: Redmi Note 14 Pro ISP Pinout
Required Tools for EDL Mode Method
Make sure you have fulfilled the following requirements:
- A tool that supports EDL mode works.
- A tweezers
- Microscope or magnifier
Read more: Redmi 13 5G UFS ISP PinOUT
How to Boot into Brom Mode
- Open the back panel of the Realme 10 Pro Plus
- Disassemble the phone.
- Locate the EDL point area on the PCB.
- Now you need a Copper Wire or Tweezer to short that pinout
- Once you’re done, connect your smartphone to the PC using a USB cable
- Realme 10 Pro Plus Test point to Hard Reset, FRP Bypass or Flash firmware.
Do read: Realme C71 RMX5303 SPD Test Point
- Now, use any unlock or flashing tool for Qualcomm to fix your phone.
- In the tool, click scan COMPort
- Select the MediaTek BROM Flash Port.
- Bypass FRP: Navigate to the tool functions: Click – Reset FRP
- Fix Dead Boot: Select the firmware & click flash.
- That’s it.
