If your Oppo A53 is stuck at boot logo, Reset FRP, Screen lock or repair OS using any EDL Mode. This guide, we will covered Oppo A53 CPH2127 EDL Test Point to Reboot to 9008 Mode & quickly fix the issue and repair the phone easily.
Read more: Poco F7 (onyx) EDL Mode
What is EDL Mode Point?
A EDL point is a copper points on a PCB that allows you to boot the phone into the Qualcomm emergency download mode to perform flashing, unlocking or repairing the phone.
Read more: Poco F4 MIUI 14 FRP Bypass Unlock Google Without PC
The Oppo A53 CPH2127 EDL point enables the phone boot into the QDloader 9008 mode for flash stock ROM, bypass FRP lock, or reset userdata, etc using any tool.
Read more: Oppo A5 Pro 5G UFS ISP Pinout
The Poco Pad powered-by Qualcomm SOC’s & comes with locked USB & bootloader. So, it is impossible to boot the device into the EDL mode without authorization.
Read more: Redmi Note 14 Pro ISP Pinout
Oppo A53 CPH2127 EDL Test Point Image:
Here we provide Test Point Methods to carefully boot your device into Emergency Download Mode. So, follow the below methods to successfully Reboot your Oppo A53 to Emergency Download Mode (9008 Mode).
Also read: Motorola Moto G13 UFS ISP PinOUT
More: QPST Tool – Qualcomm QPST Flash Tool Download Latest All Version
Tip: You can use a microscope or a 10x magnifier to identify the points correctly.
Do read: Huawei Honor Play Test Point
Required Tools for EDL Mode Method
Make sure you have fulfilled the following requirements:
- A tool that supports EDL mode works.
- A tweezers
- Microscope or magnifier
Read more: Xiaomi MI Flash Tool
How to Boot into EDL Mode
- Open the back panel of the Oppo A53
- Disassemble the phone.
- Locate the EDL point area on the PCB.
- Now you need a Copper Wire or Tweezer to short that pinout
- Once you’re done, connect your smartphone to the PC using a USB cable
- Oppo A53 CPH2127 EDL point to Hard Reset, FRP Bypass or Flash firmware.
Do read: Xiaomi 12 EDL Mode
- Now, use any unlock or flashing tool for Qualcomm to fix your phone.
- In the tool, click scan COMPort
- Select the Qualcomm QDLoader 9008 port.
- Bypass FRP: Navigate to the tool functions: Click – Reset FRP
- Fix Dead Boot: Select the firmware & click flash.
- That’s it.
Also: Poco F4 EDL Mode
