On this page, we’ll show you Xiaomi Redmi 10A Test Point that helps you to connect directly to the Brom mode for flashing Firmware, repair Bricked, Forget pattern lock, FRP lock and other OS related issues easily.
Also read: Redmi A3x SPD Test Point | Reboot to Flash Mode
What is Test Point?
The test point is a copper points on a PCB that allows you to boot the phone into the download mode to perform flashing, unlocking or repairing the phone.
Read more: Oppo A40 EMMC ISP PinOUT
The Xiaomi Redmi 10A Test Point enables the Preloader & Brom mode for flash stock ROM, bypass FRP lock, or reset userdata, etc using any tool.
More: QPST Tool – Qualcomm QPST Flash Tool Download Latest All Version
Redmi 10A Test Point Image:
Tip: You can use a microscope or a 10x magnifier to identify the points correctly.
Do read: Redmi 15C EMMC ISP PinOUT | Test Point
Required Tools for EDL Mode Method
Make sure you have fulfilled the following requirements:
- A tool that supports EDL mode works.
- A tweezers
- Microscope or magnifier
Read more: Oppo K12x UFS ISP Pinout
How to Boot into Flash Mode
- Open the back panel of the Xiaomi Redmi 10A
- Disassemble the phone.
- Locate the Test point area on the PCB.
- Now you need a Copper Wire or Tweezer to short that pinout
- Once you’re done, connect your smartphone to the PC using a USB cable
- Redmi 10A Test point to Hard Reset, FRP Bypass or Flash firmware.
Do read: MediaTek MTK USB All Driver
- Now, use any unlock or flashing tool for Spreadtrum to fix your phone.
- In the tool, click scan COMPort
- Select the SPD COMport.
- Bypass FRP: Navigate to the tool functions: Click – Reset FRP
- Fix Dead Boot: Select the firmware & click flash.
- That’s it.
