Is your Huawei Honor X9a is Bricked, stuck at bootlogo, FRP lock, screen lock or other issues. Then, you’ll require EDL point or authorization to flash or repair the phone. This guide, we will show you Huawei Honor X9a EDL Test Point to Reboot to EDL 9008 Mode & quickly fix the issue easily.
Read more: Realme C61 EMMC ISP PinOUT
What is EDL Mode Point?
A EDL test point is a copper points on a PCB that allows you to boot the phone into the Qualcomm emergency download mode to perform flashing, unlocking or repairing the phone.
Read more: Huawei Nova 11i EDL Test Point
The Huawei Honor X9a EDL point enables the phone boot into the QDloader 9008 mode for flash stock ROM, bypass FRP lock, or reset userdata, etc using any tool.
Read more: Huawei Honor QCN File
The Huawei Honor X9a powered-by Qualcomm SOC’s & comes with locked USB & bootloader. So, it is impossible to boot the device into the EDL mode without authorization.
Read more: Huawei Y5 2019 (AMN-LX9) FRP File
Huawei Honor X9a EDL Test Point Image:
Here we provide Fastboot, ADB, and Test Point Methods to carefully boot your device into EDL Mode. So, follow the below methods to successfully Reboot your Huawei Honor X9a to Emergency Download Mode (EDL Mode).
Also read: Easy Unlocker Fastboot Reader
More: QPST Tool – Qualcomm QPST Flash Tool Download Latest All Version
Tip: You can use a microscope or a 10x magnifier to identify the points correctly.
Do read: Huawei FRP Reset File
Required Tools for EDL Mode Method
Make sure you have fulfilled the following requirements:
- A tool that supports EDL mode works.
- A tweezers
- Microscope or magnifier
Read more: Huawei Cert Files
How to Boot into EDL Mode
- Open the back panel of the Huawei Honor X9a
- Disassemble the phone.
- Locate the EDL point area on the PCB.
- Now you need a Copper Wire or Tweezer to short that pinout
- Once you’re done, connect your smartphone to the PC using a USB cable
- Huawei Honor X9a EDL point to Hard Reset, FRP Bypass or Flash firmware.
Do read: Huawei USB Driver
- Now, use any unlock or flashing tool for Qualcomm to fix your phone.
- In the tool, click scan COMPort
- Select the Qualcomm QDLoader 9008 port.
- Bypass FRP: Navigate to the tool functions: Click – Reset FRP
- Fix Dead Boot: Select the firmware & click flash.
- That’s it.
Also: Haafedk Kirin Free Tool
