Samsung Galaxy M52 SM-M526B UFS ISP Pinout | Test Point

Photo of author
Published on:
Follow

This guide, we’ll show you Samsung M52 SM-M526B UFS ISP PinOUT & Test Point that helps you to connect directly to the UFS storage chip and allows you to repair the Bricked, Forget pattern lock, FRP lock and other OS related issues easily.

What is ISP Pinout?

ISP (In-System Programming) allows flash chip to be programmed without removing it from the PCB. It uses a specific pinout and protocol to communicate with computer.

A test point is a copper points on a PCB that allows you to boot the phone into the emergency download mode to perform flashing, unlocking or repairing the phone.

Read more: Realme 11 5G EMMC ISP PinOUT

Samsung Galaxy M52 SM-M526B UFS ISP Pinout | Test Point

Read more: Samsung A16 SM-A165F ISP Pinout

Samsung M52 SM-M526B UFS ISP PinOUT | Test Point Image:

Here we provide ISP and Test Point Methods to carefully boot your device into Flash Mode. So, follow the below methods to successfully Reboot your Samsung M52 5G to ISP Mode.

Also read: How to Enter Download or EDL Mode on Oppo Phone

Samsung Galaxy M52 SM-M526B UFS ISP Pinout | Test Point

More: QPST Tool – Qualcomm QPST Flash Tool Download Latest All Version

UFS ISP Pin Labels You Need:

  • CLK
  • TXOP
  • TXON
  • RXOP
  • RXON
  • GND – Ground

Tip: You can use a microscope or a 10x magnifier to identify the points correctly.

Required Tools for ISP Pinout Method

Make sure your workstation includes:

  • UFI Box, Easy JTAG Plus, or Medusa Pro
  • 0.1mm – 0.3mm jumper wires
  • Fine-tip soldering iron
  • Soldering flux
  • Isopropyl Alcohol (IPA 99%)
  • Multimeter
  • Microscope or magnifier

Also read: Samsung S25 Ultra SM-S938B/U UFS ISP PinOUT

How to Connect ISP to UFS or EMMC Box

  • Open the back panel of the Samsung M52
  • Disassemble the phone.
  • Locate the eMMC chip area on the PCB.
  • Find & Solder to ISP Points
  • Use the above diagram to identify these pins: CLK, TXON, TXOP, GND, and RXON, RXOP.
  • Samsung M52 UFS ISP PinOUT to Hard Reset, FRP Bypass or Flash firmware.
  • Or, you can use the test points.
  • Connect to UFI or Easy JTAG,
  • In the UFI or Easy Jtag Software:
  • Click Identify UFS
  • Bypass FRP: Navigate to: User Partition – Special Task – Reset FRP
  • Fix Dead Boot: Select the firmware & click flash.
  • That’s it.

Also: Realme X7 Pro 5G RMX2121 Network Unlock File

 

Share on:

I write about Android FRP Solutions, Android problems, GSM tutorials. If your device stuck at the Google Account Verification screen then here you can find all the possible ways to Bypass it. In my free time, I love to play games:

Recommended Reading…

Leave a Comment