This guide, we’ll show you Xiaomi Poco X5 Pro EDL Test Point that helps you to Reboot to EDL QDloader 9008 mode and allows you to repair the Bricked, Forget pattern lock, FRP lock and other OS related issues easily.
What is EDL Mode Point?
A EDL test point is a copper points on a PCB that allows you to boot the phone into the Qualcomm emergency download mode to perform flashing, unlocking or repairing the phone.
Read more: Xiaomi Civi 4 Pro EDL Test Point
The Poco X5 Pro EDL point enables the phone boot into the QDloader 9008 mode for flash stock ROM, bypass FRP lock, or reset userdata, etc using any tool.
Read more: Redmi Note 13 Pro Plus 5G Preloader Download
The Poco X5 Pro powered-by Qualcomm SOC’s & comes with locked USB & bootloader. So, it is impossible to boot the device into the EDL mode without authorization.
Read more: Realme Narzo N61 Test Point
Xiaomi Poco X5 Pro EDL Test Point Image:
Here we provide Fastboot, ADB, and Test Point Methods to carefully boot your device into EDL Mode. So, follow the below methods to successfully Reboot your Poco X5 Pro to Emergency Download Mode (EDL Mode).
Also read: How to Enter Download or EDL Mode on Oppo Phone
More: QPST Tool – Qualcomm QPST Flash Tool Download Latest All Version
Tip: You can use a microscope or a 10x magnifier to identify the points correctly.
Required Tools for EDL Mode Method
Make sure you have fulfilled the following requirements:
- A tool that supports EDL mode works.
- A tweezers
- Microscope or magnifier
How to Boot into EDL Mode
- Open the back panel of the Poco X5 Pro
- Disassemble the phone.
- Locate the EDL point area on the PCB.
- Now you need a Copper Wire or Tweezer to short that pinout
- Once you’re done, connect your smartphone to the PC using a USB cable
- Poco X5 Pro EDL point to Hard Reset, FRP Bypass or Flash firmware.
- Now, use any unlock or flashing tool for Qualcomm to fix your phone.
- In the tool, click scan COMPort
- Select the Qualcomm QDLoader 9008 port.
- Bypass FRP: Navigate to the tool functions: Click – Reset FRP
- Fix Dead Boot: Select the firmware & click flash.
- That’s it.
