If your Honor X9c Qualcomm smartphone is stuck at bootlogo, Forget pattern lock, or you are not able to unlock FRP. This page, we will show you Honor X9c EDL Test Point to Reboot to EDL Mode 9008 & quickly fix the issue and repair the phone easily.
What is EDL Point?
A EDL test point is a copper points on a PCB that allows you to boot the phone into the emergency download mode to perform flashing, unlocking or repairing the phone.
Read more: Xiaomi Civi 4 Pro EDL Test Point
The Honor X9c EDL point enables the phone boot into the QDloader 9008 mode for flash stock ROM, bypass FRP lock, or reset userdata, etc using any tool.
Read more: Redmi Note 13 Pro Plus 5G Preloader Download
The Honor X9c powered-by Qualcomm SOC’s & comes with locked USB & bootloader. So, it is impossible to boot the device into the EDL mode without authorization.
Read more: Realme Narzo N61 Test Point
Honor X9c EDL Test Point Image:
Here we provide Fastboot, ADB, and Test Point Methods to carefully boot your device into EDL Mode. So, follow the below methods to successfully Reboot your Honor X9c to Emergency Download Mode (EDL Mode).
Also read: How to Enter Download or EDL Mode on Oppo Phone
More: QPST Tool – Qualcomm QPST Flash Tool Download Latest All Version
Tip: You can use a microscope or a 10x magnifier to identify the points correctly.
Required Tools for EDL Mode Method
Make sure you have fulfilled the following requirements:
- A tool that supports EDL mode works.
- A tweezers
- Microscope or magnifier
How to Boot into EDL Mode
- Open the back panel of the Honor X9c
- Disassemble the phone.
- Locate the EDL point area on the PCB.
- Now you need a Copper Wire or Tweezer to short that pinout
- Once you’re done, connect your smartphone to the PC using a USB cable
- Honor X9c EDL point to Hard Reset, FRP Bypass or Flash firmware.
- Now, use any unlock or flashing tool for Qualcomm to fix your phone.
- In the tool, click scan COMPort
- Select the Qualcomm QDLoader 9008 port.
- Bypass FRP: Navigate to the tool functions: Click – Reset FRP
- Fix Dead Boot: Select the firmware & click flash.
- That’s it.
