If your Xiaomi Redmi A4 smartphone is Bricked, Forget pattern lock, or you are not able to unlock FRP. This page, will show you Redmi A4 EDL Point & Test Point to reboot into Qualcomm 9008 mode and quickly repair the phone easily.
The EDL point enables the phone boot into the QDloader 9008 mode for flash stock ROM, bypass FRP lock, or reset userdata, etc using any tool.
What is EDL Point?
A EDL test point is a copper points on a PCB that allows you to boot the phone into the emergency download mode to perform flashing, unlocking or repairing the phone.
Read more: Samsung Galaxy A71 SM-A715F EDL Point
The Vivo Y20i powered-by Qualcomm SOC’s & comes with locked USB & bootloader. So, it is impossible to boot the device into the EDL mode without authorization.
So, If your Qualcomm smartphone is Bricked, Forget pattern lock, or you are not able to unlock FRP, then Vivo Y20i Test Point help you to fix it quickly.
Read more: Vivo Y35 Hard Reset & Factory Reset
Xiaomi Redmi A4 EDL Point (Test Point) ISP Pinout Image
Here we provide Fastboot, ADB, and Test Point Methods to carefully boot your device into EDL Mode. So, follow the below methods to successfully Reboot your Redmi A4 to Emergency Download Mode (EDL Mode).
Also read: How to Enter Download or EDL Mode on Oppo Phone
More: QPST Tool – Qualcomm QPST Flash Tool Download Latest All Version
Tip: You can use a microscope or a 10x magnifier to identify the points correctly.
Required Tools for EDL Mode Method
Make sure you have fulfilled the following requirements:
- A tool that supports EDL mode works.
- A tweezers
- Microscope or magnifier
How to Boot into EDL Mode
- Open the back panel of the Xiaomi Redmi A4
- Disassemble the phone.
- Locate the EDL point area on the PCB.
- Now you need a Copper Wire or Tweezer to short that pinout
- Once you’re done, connect your smartphone to the PC using a USB cable
- Redmi A4 EDL point to Hard Reset, FRP Bypass or Flash firmware.
- Now, use any unlock or flashing tool for Qualcomm to fix your phone.
- In the tool, click scan COMPort
- Select the Qualcomm QDLoader 9008 port.
- Bypass FRP: Navigate to the tool functions: Click – Reset FRP
- Fix Dead Boot: Select the firmware & click flash.
- That’s it.
