On this page, will show you Samsung Galaxy A32 SM-A325F/M EMMC ISP Pinout Test mode pinout. The pinout enables memory-level flashing, unlocking, and repairing the phone without removing the Emmc from PCB.
What is ISP Pinout?
ISP (In-System Programming) allows flash chip to be programmed without removing it from the PCB. It uses a specific pinout and protocol to communicate with computer.
A test point is a copper points on a PCB that allows you to boot the phone into the emergency download mode to perform flashing, unlocking or repairing the phone.
Read more: Samsung A06 SM-A065F ISP EMMC PinOUT
The latest Samsung Galaxy A32 SM-A325F/M powered-by MTK SOC’s & comes with locked USB & bootloader. So, it is impossible to boot the device into Download mode without authorization.
Read more: Vivo Y04 ISP PinOUT EMMC
Samsung A32 SM-A325F/M ISP EMMC Pinout | Test Point Image:
Here we provide ISP and Test Point Methods to carefully boot your device into Flash Mode. So, follow the below methods to successfully Reboot your Samsung A32 SM-A325F/M to MTK ISP Mode.
Also read: Samsung A32 Hard Reset & Factory Reset
More: QPST Tool – Qualcomm QPST Flash Tool Download Latest All Version
EMMC ISP Pin Labels You Need:
- CMD – Command Line
- CLK – Clock
- DAT0 – Data line 0
- VCC / VCCQ – Power supply for EMMC
- GND – Ground
Tip: You can use a microscope or a 10x magnifier to identify the points correctly.
Required Tools for ISP Pinout Method
Make sure your workstation includes:
- UFI Box, Easy JTAG Plus, or Medusa Pro
- 0.1mm – 0.3mm jumper wires
- Fine-tip soldering iron
- Soldering flux
- Isopropyl Alcohol (IPA 99%)
- Multimeter
- Microscope or magnifier
Also read: How to Take screenshot on Samsung Galaxy A32
How to Connect ISP to EMMC Box
- Open the back panel of the Samsung A32
- Disassemble the phone.
- Locate the eMMC chip area on the PCB.
- Find & Solder to ISP Points
- Use the above diagram to identify these pins: CLK, CMD, DATA0, GND, VCCQ, VCC.
- Samsung A32 SM-A325F/M ISP EMMC PinOUT to Hard Reset, FRP Bypass or Flash firmware.
- Or, you can use the test points.
- Connect to UFI or Easy JTAG,
- In the UFI or Easy Jtag Software:
- Click Identify eMMC
- Bypass FRP: Navigate to: User Partition – Special Task – Reset FRP
- Fix Dead Boot: Select the firmware & click flash.
- That’s it.
Also: FRP Reset Samsung A32
Warning: Shorting the wrong test or ISP points can damage your Samsung A32 A325F/M. Please proceed carefully!
