If your Jio F220B phone is stuck on JIO Logo due to a firmware corruption, boot loop, or hardware malfunction. This guide, we will shows you a detailed step-by-step Jio F220 Hang on Logo guide to flash & fix the phone easily.
Read more: All LYF Jio Boot Key for Flashing
How to Unbrick Jio F220 Hang on Logo Solution
Here, we provide the most common and useful method is to flash stock firmware on your Phone. This makes the phone like new and you will start enjoying using your Jio F220B again. Before that, you will need to follow the requisites before flashing the phone.
Read More: Jio Bharat 2 Password Unlock
Pre-requisites
The following tools, files, and instructions will be needed to install stock firmware and unbrick your Jio F220B. Please make sure to follow all these Prerequisites before flashing the phone.
- Full Charge your Jio F220B.
- Use the OEM original USB cable.
- Please take backup of your Jio F220B.
- Install QPST Flash Tool and Qualcomm Driver on your Windows.
More: Jio LYF F101K Hard Reset
Downloads Stock Firmware & Flash Tool
Download the stock firmware and flash tool from below to begin the unbricking process.
Step-By-Step process to Fix Hang on Logo
The OFil flash tool is a service center firmware flash or update tool to perform flashing or unbrick the phone. You can contact me to get login and flash your phone.
Read: Jio Lyf F221s Hard Reset
Extract Firmware & Tool
- Download latest version of QPST tool & stock firmware,
- Next, extract both files to your Windows computer.
- Install the Qualcomm Driver.
Run QPST Tool
- Run QPST Setup.exe on your computer.
- Install the tool, Tap Next > Install > Finish.
- Next, Install Qualcomm USB Driver.
Also read: Jio Lyf F211S Hard Reset
Read: Jio Lyf F41t Hard Reset
Configure Flash Tool
- Click Flat Build.
- Click on BROWSE from the Select firmware folder and choose the prog_emmc.elf or mbn.
More: How To Jio Lyf F81e Hard Reset
- Then click on Load XML and select RawProgram0.xml & Patch0.xml file.
Read: How To Jio Lyf F250Y Hard Reset
Connect the Jio F220 phone to PC
- Power Off your Jio F220 and put into the EDL mode.
- Press & Hold * & # then connect USB cable.
- The Phone will be detected on the Windows.
- Select the Comport by clicking on the Select Port tab
More: How To Jio Lyf LF2403 Hard Reset
Start Flashing Jio F220 phone
- Click “Flash” to initiate flashing process.
- Wait until Success.
- Disconnect & Power On your Jio F220.
- That’s it.
Read more: How To Jio Lyf LF2402 Hard Reset
