This page, We will guide you on How to Unbrick OnePlus7T Pro. If your phone got bricked due to an interrupted OS update, flash custom firmware, or other OS problems, and now stuck at bootlogo. So, follow our simple step-by-step instructions and download tools to Windows.
Also read: OnePlus 7T Pro Hard Reset & Factory Reset
How to Unbrick OnePlus 7T Pro
Here, we provide the most common and useful method is to flash stock firmware on your Phone. This makes the phone like new and you will start enjoying using your OnePlus 7T Pro again. Before that, you will need to follow the requisites before flashing the phone.
Read More: OnePlus 7T Pro Android 12 FRP Bypass
Pre-requisites
The following tools, files, and instructions will be needed to install stock firmware and unbrick your OnePlus 7T Pro. Please make sure to follow all these Prerequisites before flashing the phone.
- Full Charge your OnePlus 7T Pro.
- Use the OEM original USB cable.
- Please take backup of your OnePlus 7T Pro.
- Install Android SDK and Fastboot and OnePlus Driver on your Windows.
More: Tiny ADB and Fastboot Tool V1.4.0
Downloads Stock Firmware & Flash Tool
Download the stock firmware and flash tool from below to begin the unbricking process.
- Fastboot Enhance Tool
- OnePlus 7T Pro Fix Firmware
- OnePlus 7T Pro OTA File
- Qcom MTK Driver
- MSM Download Tool
Method 1: Unbrick OnePlus 7T Pro Via OPlus Tool
The MSM Download Tool is a service center firmware flash or update tool requires authorized ID and password to perform flashing or unbrick the phone. You can contact me to get login and flash your phone.
Do read: How to Fix OnePlus OEM Unlock Missing
Extract Firmware & Tool
- Download latest version of MSM Download Tool & stock edl firmware,
- Next, extract both files to your Windows computer.
- Install the Oplus Driver.
Run Oplus Download Tool
- Run Download-tool.exe on your computer.
- Now the tool will load the dead fix ofp firmware.
- It will take some tile to load the firmware.
- Now the flash tool is ready for flash the phone.
Connect the phone to PC
- Power Off your OnePlus 7T Pro and put into the EDL mode.
- Press & Hold Volume Up + Volume Down + USB cable.
- Next, Connect the phone to PC.
- Go back to the tool, Click “Start” to initiate flashing process.
- Wait until Success.
- Disconnect & Power On your OnePlus 7T pro.
Method 2: Unbrick OnePlus 7T Pro Via Fastboot
The following method will allows you to flash the phone via Fastboot mode using Fastboot enhancer tool & firmware easily. So, wihout further delay let’s start the process.
Read more: Unbrick OnePlus Open
Preparing the firmware and tool:
- Download OnePlus 7T Pro Firmware OTA.
- Extract the firmware on your Windows computer.
- Next, Extract Fastboot Enhance Tool.
Also read: Unbrick OnePlus Nord N30
OnePlus 11R Fastboot Mode.
- Next, Power Off your OnePlus 7T Pro phone.
- Reboot the phone to Fastboot Mode.
- Connect your phone to a computer using USB cable.
Run Fastboot Enhance Tool
- Run Fastboot Enhance Tool as Admin.
- Select Device Serial port.
Read more: Unbrick OnePlus 12
Start Flashing OnePlus 7T Pro
- In the tool window, select ‘Reboot to FastbootD’.
- Now the phone will reboot to Fastboot Download mode.
- Next, Flash Payload.bin
- Click on ‘Flash payload.bin’
- After that, Click Browse and select payload.bin file from stock firmware folder.
- The flashing process will be started, wait for finish.
- It will take few minutes to complete flashing the OnePlus 7T Pro phone.
- Once the flashing process is finished,
- Click wipe userdata.
- Next, Wait for Powered On your OnePlus 7T Pro.
- Done.
Read More: Unbrick OnePlus Open
