If your OnePlus 12 got bricked due to an interrupted OS update, flash custom firmware, or other OS problems, whatever the reason, the phone will be dead, stuck at bootlogo. You can Unbrick OnePlus 12 by following our simple step-by-step instructions and tools.
Do check: Convert OnePlus 10 Pro from ColorOS to OxygenOS
How to Unbrick OnePlus 12
Here, we provide the most common and useful method is to flash stock firmware on your Phone. This makes the phone like new and you will start enjoying using your OnePlus 12 again. Before that, you will need to follow the requisites before flashing the phone.
Read More: FRP Bypass OnePlus Nord N30
Pre-requisites
The following tools, files, and instructions will be needed to install stock firmware and unbrick your OnePlus 12. Please make sure to follow all these Prerequisites before flashing the phone.
- Full Charge your OnePlus 12 & 12R.
- Use the OEM original USB cable.
- Please take backup of your OnePlus 12.
- Install Android SDK and Fastboot and OnePlus Driver on your Windows.
More: Tiny ADB and Fastboot Tool V1.4.0
Downloads Stock Firmware & Flash Tool
Download the stock firmware and flash tool from below to begin the unbricking process.
- OnePlus 12 OTA File
- Fastboot Enhance Tool
- OnePlus 12 EDL Firmware
- Oplus Qcom MTK Driver
- Oplus Tool
- Contact me for paid service
Method 1: Unbrick OnePlus 12 Via OPlus Flash Tool
The Oplus flash tool is a service center firmware flash or update tool requires authorized ID and password to perform flashing or unbrick the phone. You can contact me to get login and flash your phone.
Extract Firmware & Tool
- Download latest version of oplus download tool & stock edl firmware,
- Next, extract both files to your Windows computer.
- Install the Oplus Driver.
Run Oplus Download Tool
- Run Download-tool.exe on your computer.
- Log in oplus tool using your Oppo ID credentials.
- Click Browse and select the Ofp firmware from the firmware folder.
Connect the phone to PC
- Power Off your OnePlus 12 and put into the EDL mode.
- Press & Hold Volume Up + Volume Down + USB cable.
- Next, Connect the phone to PC.
- Go back to the tool, Click “Flash” to initiate flashing process.
- Wait until Success.
- Disconnect & Power On your OnePlus 12.
Method 2: Unbrick OnePlus 12 Via Fastboot
The following method will allows you to flash the phone via Fastboot mode using Fastboot enhancer tool & firmware easily. So, wihout further delay let’s start the process.
Preparing the firmware and tool:
- Download OnePlus 12 Firmware OTA.
- Extract the firmware on your Windows computer.
- Next, Extract Fastboot Enhance Tool.
OnePlus 12 Fastboot Mode.
- Next, Power Off your OnePlus 12 phone.
- Reboot the phone to Fastboot Mode.
- Connect your phone to a computer using USB cable.
Run Fastboot Enhance Tool
- Run Fastboot Enhance Tool as Admin.
- Select Device Serial port.
Start Flashing OnePlus 12
- In the tool window, select ‘Reboot to FastbootD’.
- Now the phone will reboot to Fastboot Download mode.
- Next, Flash Payload.bin
- Click on ‘Flash payload.bin’
- After that, Click Browse and select payload.bin file from stock firmware folder.
- The flashing process will be started, wait for finish.
- It will take few minutes to complete flashing the OnePlus 12 phone.
- Once the flashing process is finished,
- Click wipe userdata.
- Next, Wait for Powered On your OnePlus 12.
- Done.
Read More: Haafedk GSM Tool
